White Zinc Alloy Pin Belt Buckle with Attachment Base, 30mm/35mm

• Buckle Type

  Pin buckle
  Material

  Zinc, Zinc alloy
• Style

  Vintage
  Color

  Nickle Free/Rose Gold/Black/Antique Brass,as your request
• Application

  Strap/Belt
  Size

  30MM, 35MM or customized
• Logo

  Customized Logo
  Design

  Customized Desgin
• MOQ

  500 PCS
  style

  pin buckle
• Package

  One by one package or customized

Specify the White version of this zinc-alloy pin belt buckle with its selected attachment parts. The elongated rounded frame carries a curved pin, alongside a keeper-loop-like section and block-like base. Separate 30MM and 35MM references are stated, with custom sizing proposed.

Trace the strap from the attachment base to the pin

Begin with a drawing of the complete strap route through the chosen parts. Confirm the supplied component list and the way the base attaches to the strap end. The pictured arrangement does not demonstrate a clamping or release mechanism, so trial any required base operation on the exact sample.

Frame and pin

Check the usable opening, pin reach and fastening-hole position.

Keeper section

Check the clear passage with the intended strap and folded material.

Attachment base

Confirm the included base and its actual fastening method.

Resolve both size references for the chosen version

Ask for a selected drawing defining each 30MM and 35MM feature. The two nominal references do not establish measured clearances or selectable size variants. Use the sample to check the intended belt assembly before approving a required adjustment arrangement.

• The White supplied configuration and component list.
• The measured feature for each nominal reference.
• The strap thickness at every passage.
• The curved pin and chosen fastening-hole layout.
• The base attachment and any required release sequence.

Agree the alloy, artwork and packing requirements

Confirm the selected zinc-alloy grade and a physical White surface sample. Proposed custom size, logo, design and individual or custom packing can be included in the enquiry. The stated minimum is 500 PCS; obtain current quantity and sample terms for the chosen configuration. Where surface chemistry or service life matters, request evidence for the actual fitting rather than inferring it from appearance.