BAG STRAP HARDWARE
Coordinated Hardware for Removable Bag Strap Ranges
Build a removable bag strap around four choices: the bag-side ring, opening snap, adjustment return and any intermediate swivel. Match every eye to the finished strap fold, then coordinate the appearance of the selected parts. Send the complete route and component counts so your enquiry covers a usable hardware group and any repair spares.
- Map the routeSeparate ends, adjuster and intermediate junction.
- Keep the foldsCompare every finished strap attachment.
- Count the setName each component and its material.
A closer product look
Separate the intermediate swivel from the end snap
Relia can discuss 102095 and YF102091DC between two strap sections, with YF10111DC and separate D-rings for removable ends. Show finished folds at each eye so intermediate rotation is not confused with an opening hook.
Assign each connector its place
- End snapProvides the selected removable-end connection.
- Bag-side ringReceives the snap at the bag attachment.
- Intermediate swivelConnects two ends through a rotating junction.
Read the design and specification notes
Relia can discuss 102095 and YF102091DC where two strap sections meet through a rotating connector. The YF10111DC family addresses removable-end hardware, with separate D-ring choices for the bag-side attachment. Show the finished fold entering each eye. This makes the intermediate connector's role clear without treating it as an opening hook or assuming that every similar figure-eight outline has the same usable passage.
Choose for your application
Define the parts within the YF10111DC family
Choose the YF10111DC size option, then list the snap, ring and adjuster you need. A component-by-component material description makes the group easier to compare and reorder. Confirm the material allocation for the selected pieces as part of the quotation rather than applying one material to the whole set.
Turn the family into defined pieces
- Size option
- Choose 1/2, 5/8, 3/4 or 1 inch.
- Contents
- Name and count snap, ring and adjuster separately.
- Material allocation
- Identify the material of each selected component.
Read the design and specification notes
For YF10111DC, choose the 1/2, 5/8, 3/4 or 1-inch option and list the snap, ring and adjuster you need. Confirm the material of every selected piece in the quotation, then keep the same component count and strap route with the sample.
Choose for your application
Compare the two swivel models independently
The zinc-alloy 102095 has a 25 × 51 mm label; YF102091DC has Zinc, Bright Nickel and 5/8 × 2-inch descriptions. Keep their dimension axes and usable eye passages separate rather than equating similar figure-eight outlines.
Keep the swivel identities distinct
- 102095
- Zinc Alloy with a 25 × 51 mm label.
- YF102091DC
- Zinc with a 5/8 × 2-inch label.
- Actual passage
- Mark both eye openings on the selected drawing.
Read the design and specification notes
The 102095 swivel connector has a Zinc Alloy material description and a 25×51 mm size. YF102091DC has Zinc, Bright Nickel and 5/8×2 inch descriptions. Keep the two size axes and attachment-eye dimensions visible on the drawing; similar figure-eight forms do not make their openings identical.
A closer product look
Select the D-ring with the snap and strap
The linked YF11404ST bag-strap ring has a Zinc material description with Rose Gold or LIGHT GOLD options. Keep the full selected size and marked axes beside the folded strap and mating snap so the quotation covers the intended ring.
For this bag-strap ring, keep the Zinc material description with the selected size and colour option.
Compare the ring at both contact areas
- Strap sideInclude the completed fold around the ring.
- Snap sideShow the section that the hook must engage.
- Selected optionRetain the full dimension string and appearance.
Read the design and specification notes
The linked YF11404ST bag-strap ring has a Zinc material description with Rose Gold or LIGHT GOLD options and sizes from 3.0×16 mm to 6.0×50 mm. Choose the required section and opening, then compare the ring with the folded strap and mating snap on the same assembly drawing.
Construction and making
Coordinate the finished group without merging materials
Polishing prepares or changes the underlying surface; electroplating adds a surface metal layer. A mixed hardware group therefore needs a component-level material and appearance discussion. Compare each completed visible face and strap-contact edge together. For YF10111DC, confirm each selected component’s actual material and finishing route in the quotation, then compare its completed sample with the intended strap.
A Finished-Strap Comparison
- Route and countName the opening snap, bag-side ring, adjuster and any intermediate swivel.
- Material by componentKeep the YF10111DC allocation separate from the rings and other swivels.
- Completed appearanceCompare each selected face and contact edge under its own material and finish.
Read the design and specification notes
Electroplating adds a surface metal layer, while polishing prepares or changes the underlying surface. A mixed hardware group can therefore require component-specific surface decisions even when the intended colour matches. For the selected YF10111DC pieces, rings and swivels, the material allocation and actual finishing route need aligning first. Compare the completed visible faces and strap-contact edges together, with an appearance sample for the group rather than one colour name alone.
Share the product link and your intended use, with these details:
- Complete strap route with finished folds and optional intermediate rotation
- Exact component links, full size options and material allocation questions
- Counts for assembly parts and repair spares with desired appearance
Choose for your application
Keep one assembly drawing beside the parts list
Show the removable end, intermediate junction and adjustment return in a single route. A small parts schedule beside that drawing connects each loose component with its actual use and makes missing or duplicated pieces easier to identify.
Link positions to purchase lines
- End connectionAssign snap and bag-side ring.
- Middle junctionAssign an intermediate connector if needed.
- AdjustmentAssign the adjuster and its return path.
Read the design and specification notes
A useful bag-strap brief shows the removable end, intermediate junction and adjustment return in one route. Beside it, retain a small parts schedule. This connects each loose component to the place where it will be used.
| Position | Reference route | Input |
|---|---|---|
| Removable end | YF10111DC | Selected set contents |
| Intermediate junction | 102095 or YF102091DC | Eye dimensions |
| Bag attachment | YF11404ST D-ring | Section and opening |
A closer product look
Include the thickness added by completed folds
Show the sewn or otherwise fixed layers at every eye and the return through the adjuster. A complete strap exposes the space used by those layers and where the design needs rotation rather than a fixed junction.
Compare the finished attachment envelope
- Fixed foldShow every layer around the eye.
- Adjustment returnInclude the doubled webbing route.
- Rotating junctionLocate the section where rotation is required.
Read the design and specification notes
Include the completed folds at each eye and the return through the adjuster. The extra thickness of stitched or otherwise fixed layers belongs in the clearance review. It is also useful to show any section where the designer wants rotation rather than a fixed junction.
Choose for your application
Count components before calling the group a set
Two removable ends and an intermediate swivel require a different purchase list from one replacement snap. Count by model and option, and keep individual repair spares separate so the supplied group has a clear meaning.
Make the supplied contents explicit
- Assembly countList quantities for each strap position.
- Selected optionKeep size and appearance on every line.
- Repair sparesCount loose replacements separately from complete groups.
Read the design and specification notes
A strap needing two removable ends and an intermediate connector is a different purchase list from a single replacement snap. State the exact count by model and option. Keep spare individual parts as separate lines when they are intended for later repair stock.
Products behind these choices
YF10111DC Metal Snap-Hook, Slide-Adjuster and D-Ring Set for Bag Straps
Define the selected snap, ring and adjuster contents and material allocation.
View this product →102095 Zinc Alloy 8-Shape Swivel Buckle, 25 x 51 mm
Compare the 25 × 51 mm zinc-alloy intermediate swivel.
View this product →YF11404ST D Rings for Handbag Straps and Belts in Rose Gold or LIGHT GOLD
Match the linked Zinc D-ring to the folded strap and snap.
View this product →YF102091DC Zinc Alloy Figure Eight Swivel Connector, Bright Nickel
Compare the separate 5/8 × 2-inch YF102091DC swivel.
View this product →Start a product discussion
Send the complete bag-strap component schedule
Send the complete bag-strap route, finished fold dimensions and the snap, ring, adjuster and swivel you need. Add quantities for each component, desired appearance and any loose repair spares. Confirm the selected pieces' materials together with the quotation for the group.
Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, ChinaProduct discussion details
Prepare the bag-strap enquiry
- MapShow the complete route and finished folds.
- IdentifyName every component, option and material question.
- CountSeparate assembly parts from repair-spare quantities.