Practical sourcing guide
Feed Scoops for Retail Body and Grip Choices
Choose a feed scoop around the bin or bag opening your customer uses. Compare side, rear and bridge grips for reach and hand clearance, then specify the body volume and retail unit. A simple view of the opening and scoop path helps narrow the choice before you allocate colours and quantities.
- Opening firstShow bin or bag width and overhead space.
- Grip choiceCompare side, rear and bridge arrangements.
- Volume separatelyKeep litres apart from feed weight.
Choose for your application
Choose a Grip for the Opening
Relia can discuss SC-1408, 16002 and 16001 against the opening your customers use. Start with grip position, reach and the complete envelope, then choose the desired retail unit and volume basis instead of treating all PP scoops as equivalent.
Opening to Scoop Choice
- SC-1408Side-grip comparison.
- 16002Rear-handle comparison.
- 16001Bridge-and-rear-grip comparison.
Read the design and specification notes
Compare SC-1408, 16002 and 16001 against the opening and space above your feed bin. Choose the side, rear or bridge grip you want, then confirm the selected bowl dimensions and volume basis. This gives the retail range a practical handling choice before appearance is coordinated.
| Model | Material | Size reference |
|---|---|---|
| SC-1408 | PP | 14*17*16CM;nominal 1.5L |
| 16002 | PP | 33cm |
| 16001 | PP | 21.5-*15-15cm; clarify format |
A closer product look
Locate the 33cm Measurement
Model 16002 shows an open bowl and rear handle with a 33cm size entry. Compare the complete shape for reach, but first assign the measurement to the drawing so length does not become an assumed bowl capacity or hand clearance.
Define the Rear-Handle Version
- Overall form
- Open bowl and rear handle.
- Size
- 33cm with feature to be assigned.
- Fit comparison
- Bowl opening and available hand space.
Read the design and specification notes
The 16002 reference shows an open bowl and rear handle, with a 33cm size entry. Use that complete shape when discussing reach into your feed container. Ask which feature the 33cm describes, then compare bowl opening and handle space against the container rather than infer capacity from length.
Choose for your application
Compare Hand Positions
Side, rear and bridge grips put the hand in different positions relative to the bowl. Mark the bin opening and available overhead space, then compare the scoop path; the useful choice comes from clearance rather than an unverified ergonomic advantage.
Grip and Clearance
- Side grip
- Space beside the bowl.
- Rear extension
- Reach behind the bowl.
- Bridge grip
- Space above the bowl.
Read the design and specification notes
An upright side grip, rear extension and bridge grip place the hand in different positions relative to the bowl. Mark the storage-bin opening and the space above it, then choose which scoop form to compare. That makes the requested shape practical without inventing an ergonomic advantage for a material or handle style.
Choose for your application
Keep Volume and Weight Separate
SC-1408 offers a nominal 1.5L capacity direction. Confirm whether you need brimful or usable volume, then determine feed mass separately for the actual contents. Keep those choices beside the scoop's outside dimensions and intended grip route.
Three Different Quantities
- Outside sizeThe scoop’s dimensional envelope.
- Usable volumeAgreed filling convention.
- Feed massDepends on the actual contents.
Read the design and specification notes
Confirm the volume basis for the nominal 1.5L SC-1408: brimful or usable fill. Compare the outside shape with the intended bin opening, and determine feed weight separately for the actual contents and filling routine.
A closer product look
Confirm the 16001 Body and Grip Dimensions
For 16001, mark the bowl, bridge grip and rear handle on a dimension drawing. Confirm the actual overall size and hand-clearance measurements for the selected version. You can then compare its route into the feed container with the other scoop shapes.
Request the selected 16001 drawing with clearly assigned dimensions and axes.
Confirm the Tool Dimensions
- ModelKeep the 16001 identity.
- AxesLocate each body and grip dimension.
- VolumeRequest its own measurement basis.
Read the design and specification notes
For 16001, request a complete bowl-and-grip drawing with the actual dimension axes marked. Compare the bridge clearance, rear handle and route into the intended feed bin. Confirm its body volume separately from SC-1408 so the two choices can be assessed on their own geometry.
Construction and making
Connect the Grip Root and Lip
In injection-moulded scoop designs, gate placement affects flow-front junctions and the location of a trimmed mark. Compare the grip root and open lip as separate functional areas, with finish locations on the drawing rather than one vague overall appearance requirement.
Agree the selected scoop's making route and finish requirements at the grip root and lip.
Forming to Finish Locations
- Gate locationLocate the remaining trimmed mark.
- Grip rootCompare the connection and nearby surface.
- Open lipCompare its edge and outline.
Read the design and specification notes
In an injection-moulded scoop design, gate position affects where flow fronts meet and where a trimmed gate mark remains. A grip root and the open lip are different functional areas, so their surface requirements should be located on the drawing rather than described as one overall finish. This is a general process explanation, with the selected route agreed per model. Compare the grip connection, lip and visible moulding marks on the same sample before choosing the complete retail version.
Share the product link and your intended use, with these details:
- Container opening: Send bin or bag opening dimensions and the space above and beside it.
- Grip and envelope: Choose side, rear or bridge form and mark the desired reach and clearances.
- Volume and contents: Specify the volume basis and the scoop-only retail packing required.
A closer product look
Define the Retail Contents
The SC-1408-style photograph beside feed shows handling context, not an included feed product. Keep the retail unit to the selected scoop and specifically agreed packing, so a staged bag does not become an accidental wholesale bundle.
Image and Supplied Unit
- ScoopChosen model and colour.
- Feed bagContext unless separately agreed.
- PackingExplicit retail contents and count.
Read the design and specification notes
The SC-1408-style view beside feed shows the intended handling context, not an included feed product. Keep the quoted unit to the selected scoop and any specifically agreed packing. This is helpful for retail listings as well as wholesale quotations, because a staged bag should not become an accidental bundle.
Products behind these choices
SC-1408 PP Horse Feed Scoop with Handle | 1.5L Reference
PP SC-1408 offers a side grip, 14×17×16CM entry and nominal 1.5L capacity for a bin-opening comparison.
View this product →16002 PP Horse Feed Scoop | 33cm Reference and Rear Grip
PP 16002 is the rear-handle branch with a 33cm entry whose measured feature needs assignment.
View this product →16001 PP Horse Feed Scoop with Upper Bridge and Rear Grip
PP 16001 provides the bridge-and-rear-grip branch and needs its own dimensioned drawing.
View this product →Start a product discussion
Send the Opening and Grip Comparison
Send the feed-container opening, preferred grip form and volume requirement. Add overall scoop dimensions and the retail contents or packing unit. We can discuss the body that fits the intended handling route, with quantities by selected version.
Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, ChinaProduct discussion details
Build Your Enquiry
- Container openingSend bin or bag opening dimensions and the space above and beside it.
- Grip and envelopeChoose side, rear or bridge form and mark the desired reach and clearances.
- Volume and contentsSpecify the volume basis and the scoop-only retail packing required.