Practical sourcing guide

Rubber Bell Boots by Opening and Fastening Form

Start a bell-boot range with the flared form and the opening, skirt and fastening your customers need. Compare enclosed AC7050 products as a separate fit task, with internal length, width and sole dimensions. Choosing the form first makes the sample and supplied pair easier to define.

Compare open and enclosed formsReview opening and edge construction
Illustrative blue flared bell boot showing its opening and skirt
  • Bell formDefine opening, skirt and fastening dimensions.
  • Enclosed formAdd internal length, width and sole geometry.
  • Separate versionsKeep the two AC7050 entries distinct.

Choose for your application

Start with the Flared Bell Form

Relia can discuss the Rubber-labelled AC7045 bell form against your opening and fastening requirements. Keep an enclosed AC7050 enquiry on a separate line, with its own dimension drawing and material request, so the skirt and sole are not confused.

Choose the Product Form

  1. AC7045Flared bell skirt and upper opening.
  2. AC7050 size-labelledEnclosed-looking form with its own size request.
  3. AC7050 BlackSeparate enclosed entry and specification request.
Read the design and specification notes

Use AC7045 for a Rubber bell-form discussion. For AC7050, choose the Rubber version in S/M/L/XL or the Black version, then keep the chosen version with its own drawing and fastening brief. Relia can help you compare the opening, coverage and closure before you agree the material and measured size for the quotation and sample.

OpeningRequired top dimensions
SkirtFlared outline and depth
FasteningSelected split/closure arrangement

Choose for your application

Separate the Shared Model Code

Choose between the AC7050 Rubber version in S/M/L/XL and the Black version. Compare each chosen sample’s opening, sole and fastening arrangement, then confirm its material and dimensions in the quotation. Keep their size drawings separate so one version’s fit is not transferred to the other.

Confirm the complete construction of the selected AC7050 version.

Two AC7050 Versions

Size-labelled entry
Rubber-labelled form with its selected size.
Black entry
Own material and dimensional enquiry.
Comparison basis
Complete form, opening and closure.
Read the design and specification notes

Keep the Rubber-labelled S/M/L/XL AC7050 and the Black AC7050 as separate selections. Compare their complete enclosed shape, opening, sole and fastening, then confirm the component materials and measured dimensions for the version you want quoted.

Compare the Two AC7050 Versions
ReferenceMaterial and optionsSelection focus
AC7045Rubber; flared formOpening and skirt
AC7050 size-labelledRubber; S/M/L/XLMeasured size chart
AC7050 BlackBlack optionComplete construction identity

A closer product look

Read the Enclosed Green Form

The green photograph shows an enclosed-looking body rather than an open bell skirt. Use it to discuss the internal space and opening; its S/M/L/XL labels identify ordering choices, not measured hoof dimensions or a treatment purpose.

Provide measured fit requirements and intended use alongside the selected size letter.

Form Before Size Letters

Visible body
Enclosed-looking sole and opening.
Size options
Choose the size, then confirm measured fit.
Fit input
Actual internal dimensions and intended use.
Read the design and specification notes

Compare the enclosed green form with its actual opening, sole and internal space. Use S/M/L/XL to identify the requested option, then attach a measured fit drawing for that version. Keep any intended medical or therapeutic use outside this ordinary product-fit comparison.

Illustrative green enclosed hoof shoe with visible sole and opening
Illustrative green enclosed hoof shoe with visible sole and opening

Choose for your application

Draw Different Dimension Plans

A bell form needs an upper opening, skirt span and depth. An enclosed form also needs internal length, width and sole geometry. Send the drawing that matches the chosen construction instead of using one generic chart for both.

Dimensions by Form

  • Bell upper openingMark the entry and fastening position.
  • Bell skirtMark span and depth.
  • Enclosed interiorMark length, width and sole outline.
Read the design and specification notes

For a bell form, locate the upper opening, skirt diameter or span and depth. For an enclosed form, add the internal length, width and sole-related geometry. Keeping these dimensions separate follows the general supplier-brief principle: similar size names do not make two different constructions directly comparable.

Bell formUpper opening and skirt
Enclosed formInternal outline and sole
ChartNamed dimensions by version

A closer product look

Keep the Black Version Distinct

For the Black AC7050, compare the complete enclosed body, opening and fastening with your fit drawing. Confirm its component materials and internal dimensions in that version's quotation. This gives the enclosed product its own clear specification alongside the bell-boot range.

Complete the Black Version

  1. Identify formUse the complete enclosed-body view.
  2. Specify materialRequest the chosen version’s declaration.
  3. Measure interiorUse its own internal dimension drawing.
Read the design and specification notes

Use the Black AC7050 whole-product view to show the enclosed construction you need. Confirm its materials, internal dimensions and opening with the sample request, then compare it with the actual fit drawing rather than another version's size label.

Illustrative black enclosed hoof shoe arranged to show its full construction
Illustrative black enclosed hoof shoe arranged to show its full construction

Construction and making

Connect Mould Shape and Opening

In a heat-cured rubber route, filling and curing establish the body shape before edge finishing or fastening assembly. Compare the resulting opening, skirt edge and closure against the chosen drawing; bell and enclosed forms need different dimensional checks.

Agree the material compound, making route and finished dimensions for the selected product.

Shape to Finished Interface

  1. Fill and cureThe cavity defines the body form.
  2. Finish the edgeCompare the rim and opening outline.
  3. Assemble fasteningCompare closure position and access.
Read the design and specification notes

If the chosen design uses heat-cured rubber moulding, the compound fills a cavity and curing fixes its shape. That cavity defines the opening and bell skirt or enclosed body; edge finishing and fastening assembly follow the selected construction. Agree the actual compound and making route for your chosen model in the quotation. Mark the opening edges and dimensions on its own drawing, because a bell skirt and an enclosed sole need different fit comparisons.

Cavity shapeBell skirt or enclosed body
Opening finishRim and accessible edges
Final assemblyFastening and supplied pieces

Share the product link and your intended use, with these details:

  • Form and version: Choose AC7045 bell form or the specific enclosed AC7050 entry.
  • Dimension drawing: Send opening and skirt dimensions or the enclosed internal length, width and sole outline.
  • Unit and closure: Specify fastening arrangement, size labels and single-piece or pair quantities.
Email this selection brief

A closer product look

Locate the Rim and Fastening

The AC7045 detail is useful for locating the upper rim and fastening areas. Pair that detail with a whole-product drawing, then choose the single-piece or pair unit you need rather than infer pack contents from the photograph.

Confirm the rubber composition and any performance evaluation required for your intended use.

From Detail to Order Unit

  • Rim detailCompare the edge and opening.
  • Whole formRetain the skirt and closure identity.
  • Supply unitState single pieces or pairs.
Read the design and specification notes

The AC7045 detail helps locate the rim and fastening areas for a specification request. Include the closure arrangement and relevant dimensions on the complete product drawing. A rubber declaration is useful construction information, but it does not establish natural-rubber content, abrasion performance or a medical purpose for the item.

Illustrative close detail of the blue bell boot fastening and rim
Illustrative close detail of the blue bell boot fastening and rim

Products behind these choices

Horse Bell Boot AC7045 | Rubber and Wrap Hook and Loop References

AC7045 is the Rubber-labelled flared bell-form starting point for opening, skirt and closure comparisons.

View this product →

Nature Rubber Reference Horse Hoof Shoe Bell Boot AC7050 | S M L XL Labels

Compare the enclosed AC7050 form, select S/M/L/XL and confirm its measured fit.

View this product →

AC7050 Black Horse Hoof Bell Boot Split Tab Treatment Use Enquiry

The Black AC7050 needs its own material and internal-dimension request despite sharing the model code.

View this product →

Start a product discussion

Send the Form and Dimension Drawing

Send the bell or enclosed form you need with its dimension drawing and fastening layout. Confirm the selected materials and whether your quantity is counted as single items or pairs. We can discuss the sample around that complete fit and supply requirement.

Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, China
Email your product briefUse our contact form
Product discussion details
FormFlared bell or enclosed sole
DimensionsOpening, skirt and closure
Order unitExact model and supplied count

Build Your Enquiry

  • Form and versionChoose AC7045 bell form or the specific enclosed AC7050 entry.
  • Dimension drawingSend opening and skirt dimensions or the enclosed internal length, width and sole outline.
  • Unit and closureSpecify fastening arrangement, size labels and single-piece or pair quantities.