Practical sourcing guide
Complete Manure Pan Sets and Separate Fork Lines
Buy a complete manure collection set with the pan, matching small fork, shafts and grips clearly listed. Add a long fork or replacement head as separate products when your range needs them. Comparing the same supplied contents makes quotations useful and gives later replenishment a clear parts list.
- Complete setDefine the 30534 pan and matching small fork.
- Long forkQuote the 1.5meter tool separately.
- Spare headKeep model 123 as a replenishment branch.
Choose for your application
Choose the Purchasing Unit First
Relia can discuss a complete 30534 collection arrangement, a separate long fork or replacement heads. Keep those buying units distinct before choosing colours, then map the parts and dimensions of the particular assembly you want quoted.
Three Supply Units
- 30534Collection pan and matching small-fork arrangement.
- Long metal forkSeparate complete-tool line.
- 123 headSeparate replacement-head candidate.
Read the design and specification notes
Relia’s stable-tool product range gives you three different purchasing units here: the 30534 collection arrangement, the long metal fork and the spare mesh head. We can discuss your intended set contents and replenishment lines together while keeping their codes separate. For 30534, add a component material map and dimension axes to the enquiry rather than assign ABS, iron or PVC to parts solely from the picture.
| Purchase branch | Product details | Supply question |
|---|---|---|
| 30534 set | ABS/iron/PVC; 35.5*30*79cm | Named set contents |
| Full fork | Metal; 1.5meter | Complete fork and shaft |
| 123 spare head | Iron; 38*22*7.5cm | Head and any fixings |
A closer product look
Keep the Long Fork Separate
The long mesh-panel fork lists Metal and 1.5meter, also expressed as 4.92ft. It is a separate complete fork, not the small matching fork inside a 30534 set; quote it independently when your range needs both tools.
Two Different Fork Roles
- Matching small fork
- Part of the agreed 30534 contents.
- 1.5meter fork
- Separate shaft and mesh-panel tool.
- Ordering consequence
- Different units and packing counts.
Read the design and specification notes
The long mesh-panel fork lists Metal and 1.5meter(4.92ft). Keep this as its own complete-fork line rather than assuming it is included with 30534. If your distributor range needs both collection sets and full forks, quote them separately so the shaft length and unit count remain clear.
Choose for your application
Describe the Collection Task
A pan set supports one collection arrangement while a long fork serves a different handling position. Describe the bedding, collection routine and storage space you want to support, so the assortment follows the task rather than one photograph standing for every tool.
Task to Tool Route
- Pan collectionDefine the pan and companion tool.
- Long-handle taskConsider the separate full fork.
- ReplenishmentIdentify heads and other spare parts.
Read the design and specification notes
Match the tool to the collection task: a pan set gathers smaller deposits, while a long fork suits a different handling motion. Include the bedding you use, the route to the collection point and the storage space in your brief. Those details help us compare the tool’s shape and supplied parts with your working routine.
Construction and making
Connect Bodies, Shafts and Grips
Formed bodies and grips meet shafts at sockets or fixing points. If a selected component is injection moulded, rim and socket finishing differs from assembling that component to a shaft. Compare the complete joints and replaceable parts for the chosen version.
Confirm the ABS, iron and PVC allocation by component and the making route for the selected version.
Parts to Assembly
- Formed componentsCompare rim and socket outlines.
- Shaft connectionLocate the joining and fixing features.
- Complete unitCheck grip ends and replaceable parts.
Read the design and specification notes
A collection set combines shaped bodies with shafts, grips and fixing interfaces. If a selected body or grip is injection moulded, finishing around its rim or socket is a different task from assembling the shaft to it. The actual component materials and production route need agreement for the chosen version. Mapping those stages to the pan opening, shaft sockets and grip ends helps you compare the complete assembly and identify which parts must stay replaceable.
Share the product link and your intended use, with these details:
- Complete-set contents: List pan, matching small fork, shafts, grips and fittings for the 30534 pack.
- Assembled and packed space: Mark the three size axes and send your storage or packing limits.
- Additional order lines: State separate quantities for long forks or model 123 heads and their connections.
A closer product look
Hold the Set Contents Steady
The pan-and-fork view helps locate components before comparing the complete set. Keep the chosen shafts, grips and small fork on one 30534 parts list, so later replenishment does not depend only on its pink colour or general photograph.
One Defined 30534 Version
- Collection bodiesPan and matching small fork.
- Long componentsAgreed shafts and grips.
- Small fittingsFixings and supplied accessories.
Read the design and specification notes
The separate pan/fork view helps locate each component before the whole set is considered. Keep both under the agreed 30534 parts list. If a grip, shaft or small fork changes, update the affected line so later replenishment does not rely only on the pink colour or the general set photograph.
Choose for your application
Treat Model 123 as a Spare
Iron model 123 carries 38×22×7.5cm and provides a replacement-head branch. Add the intended handle and socket details if compatibility matters; it should not be quoted as a third complete collection arrangement or assumed to fit every shaft.
Replacement-Head Brief
- Head identity
- Iron model 123.
- Envelope
- 38×22×7.5cm.
- Joint input
- Intended handle and socket arrangement.
Read the design and specification notes
The iron model 123 head carries 38*22*7.5cm and should be quoted as a replacement-head candidate. It is not a third complete collection set. Provide the intended handle/socket arrangement if you need compatibility with an existing fork, keeping that technical question separate from a new 30534 set order.
A closer product look
Use Complete Dimensions for Storage
The assembled view helps discuss how the pan and handles occupy space together. Ask for assembled and packed dimensions when storage is tight; do not split the 35.5×30×79cm entry into unverified pan capacity, handle length or shelf clearance.
Assembly to Storage Plan
- Product Range size35.5×30×79cm for the 30534 entry.
- Axis drawingLocate each measurement on the assembly.
- Packed versionDefine the parts and packing arrangement.
Read the design and specification notes
The assembled set view shows how the long handles and pan occupy space together. Ask for overall assembled and packed dimensions if your distributor supplies small stable-storage areas. The product range’s single 30534 size string should not be split into unverified pan capacity, handle length and shelf clearance.
Products behind these choices
30534 Manure Collection Pan and Fork | Shaft and Grip Review
30534 is the ABS/iron/PVC collection arrangement with 35.5×30×79cm size and an agreed pan/small-fork contents list.
View this product →Mesh-Panel Manure Fork with Long Shaft and D-Shaped Grip
The Metal 1.5meter complete fork is a separate long-tool line, not the matching small fork in the set.
View this product →123 Iron Manure Fork Replacement Head with Mesh Panel
Iron model 123 at 38×22×7.5cm supports a separate spare-head and handle-interface discussion.
View this product →Start a product discussion
Send the Complete Collection-Set Brief
Send the 30534 contents you need and an assembled-size drawing. Add long forks or spare heads as separate lines, with any retained handle details and quantities. We can discuss a complete collection unit and the components you expect to replenish.
Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, ChinaProduct discussion details
Build Your Enquiry
- Complete-set contentsList pan, matching small fork, shafts, grips and fittings for the 30534 pack.
- Assembled and packed spaceMark the three size axes and send your storage or packing limits.
- Additional order linesState separate quantities for long forks or model 123 heads and their connections.