Practical sourcing guide

Feed Containers for Hanging, Hook-Over and Floor Placement

Choose a feed container around its position: hooked over a support, hanging, carried by hand or placed on the floor. Compare the support clearance or footprint first, then the opening and capacity you need. This keeps a useful installation choice ahead of colour or a nominal litre label.

Compare container placement optionsReview bodies and hanging points
Illustrative green feed container showing separate hook-over brackets and carrying handle
  • MountingMatch hooks and hanging points to the support.
  • CarryingCompare the portable pail’s handle and rim.
  • Floor spaceCheck the complete triangular footprint.

Choose for your application

Match the Container to Its Position

Relia can discuss PP-labelled containers for mounted, carried and ground-placement uses. Send the support profile or available floor space first, so the model choice follows the installation instead of grouping different mounting arrangements under a shared litre category.

Placement to Model

  1. Hook-overSD90390 support-profile discussion.
  2. HangingSC-1407 attachment comparison.
  3. Portable or floorSC-PP08 or triangular tub.
Read the design and specification notes

Choose the support or floor position first, then compare the relevant container and attachments. For SD90390, SC-1407 and SC-PP08, keep each selected model's units and dimension axes with your installation drawing. Colours and quantities can then follow a clear placement choice.

The Four References Offer Different Placement Choices
ReferenceMaterialStarting size/volume reference
SD90390PP39*31.5*25; unit unstated
SC-1407PP39*25cm;nominal 12L
SC-PP08PPNominal 8L;confirm dimensions
Triangular tubPPNominal 27L

A closer product look

Plan the Triangular Footprint

The PP triangular tub has a nominal 27L capacity and a different placement task from a hanging bucket. Compare its complete footprint and rim with the available floor area before using the capacity label to position it within your range.

Confirm the usable capacity basis and required floor footprint for your chosen triangular tub.

Ground-Container Choice

  • FootprintFit the complete triangular outline.
  • Rim spaceAllow room around the opening.
  • Capacity classKeep the nominal 27L capacity separately from the measured footprint.
Read the design and specification notes

The nominal 27L triangular tub lists PP and offers a ground-container direction distinct from the hanging forms. Compare its complete footprint and rim with the available stable space. The nominal capacity is a useful range category, but it is not a measured usable fill line or a feed allowance.

Illustrative red triangular feed tub positioned on a clean stable floor
Illustrative red triangular feed tub positioned on a clean stable floor

Choose for your application

Start Hook-Over Buying at the Support

SD90390 lists 39×31.5×25 without units. Use its hook and handle layout to identify the mounting, lifting and clearance requirements, then add a dimension drawing with units rather than silently converting the size string to centimetres.

Confirm units and dimension axes for the 39×31.5×25 SD90390 version.

Support and Clearance

  • Support profileWidth, depth and top shape.
  • Hook fitLocate the support contact and clearance.
  • Removal spaceShow the lift-out and carrying path.
Read the design and specification notes

For SD90390, confirm the units and axes of the 39*31.5*25 dimensions. Show the support profile and the space needed to lift the container on and off, then compare the hook and handle arrangement on the same selected version.

SupportRail or wall profile
BracketOpening and location
RemovalHandle and lifting clearance

Choose for your application

Separate Capacity from Outer Size

Compare SC-1407's nominal 12L capacity and 39×25cm outer size separately. For the nominal 8L SC-PP08, confirm the complete outside dimensions and capacity basis. These measurements answer different installation and filling questions.

Size and Capacity Are Separate Choices

Outer dimensions
Assign axes and units per model.
Nominal volume
Nominal 8L or 12L capacity.
Usable capacity
Agree the requested measurement basis.
Read the design and specification notes

For SC-1407, keep the nominal 12L capacity separate from the 39*25cm outer size. For SC-PP08, confirm the units and axes of 29.8*29.5*22.7 alongside its nominal 8L capacity. Ask for the usable-fill basis you need when comparing these different container formats.

Nominal volumeNominal 8L / 12L / 27L capacities
Outer sizeModel-specific dimension string
Usable fillSeparate requested capacity basis

A closer product look

Compare the Hanging Interface

SC-1407 provides the PP hanging-bucket branch. Compare the attachment form, opening and bracket clearance with the actual support; a nominal 12L capacity does not establish that an existing installation will accept the hanging arrangement.

Hanging-Bucket Inputs

Body dimensions
39×25cm.
Attachment
Compare support and hanging-point form.
Access
Check opening and removal clearance.
Read the design and specification notes

SC-1407 lists PP with a hanging-container reference. Compare its attachment form and opening with the actual support, then choose it separately from the SD90390 hook-over body. A nominal 12L capacity does not tell you whether the available bracket clearance matches the installation your customer already uses.

Illustrative black flat-backed hanging bucket showing its opening and attachment form
Illustrative black flat-backed hanging bucket showing its opening and attachment form

Construction and making

Connect Body Shape and Hanging Points

In an injection-moulded design, flow and cooling affect body shape, while rim finishing and handle or bracket assembly address different features. Compare the finished back profile, hanging-point spacing and handle connections, because a small interface change can matter despite similar volume.

Agree the selected container's forming route, brackets and handle arrangement with its support drawing.

Body to Installed Interface

  1. Body formingCompare the complete shape and back profile.
  2. Rim finishingLocate the opening edge.
  3. Attachment assemblyCompare hanging points and handle joints.
Read the design and specification notes

For an injection-moulded container design, flow and cooling affect the finished body shape, while rim trimming and separate handle or bracket assembly address other features. A slight change around the mounting interface can matter even when the container’s overall volume appears similar. The actual forming route and component arrangement need agreement per item; PP alone does not establish them. Compare the back profile, hanging-point spacing and handle connections alongside the complete container shape.

Container bodyShape, rim and opening
Mounting pointsBack profile and support spacing
Handling partsHandle or bracket connections

Share the product link and your intended use, with these details:

  • Installed position: Send the support profile and clearances or the available floor footprint.
  • Model and contents: Choose the container and list handles, brackets or fittings required.
  • Capacity basis: Specify usable or brimful volume needs separately from dimension axes and units.
Email this selection brief

A closer product look

Keep the Portable Unit Complete

The Black PP SC-PP08 pail is a separate nominal 8L branch for a carried-container enquiry. Keep its handle and rim on the complete-unit comparison and list any extra fittings explicitly rather than assuming a bucket description includes mounting hardware.

Portable-Pail Unit

  1. BodySelected SC-PP08 version.
  2. Carry arrangementHandle and its connections.
  3. ExtrasOnly specifically agreed fittings.
Read the design and specification notes

SC-PP08 lists PP and Black, with the nominal 8L capacity. Keep the handle and rim on the complete pail comparison, particularly if it will be carried rather than left mounted. State whether the requested unit includes any additional fittings; the general bucket description does not define them.

Illustrative black portable feed pail with visible handle and rim
Illustrative black portable feed pail with visible handle and rim

Products behind these choices

SD90390 PP Hook-Over Horse and Livestock Feed Manger with Handle

PP SD90390 provides the hook-over branch with a unitless 39×31.5×25 entry to assign on a drawing.

View this product →

SC-1407 PP 12L Hanging Horse Feeder Bucket with Hook Mount

Compare the PP SC-1407 hanging bucket at nominal 12L and 39×25cm with your support drawing.

View this product →

SC-PP08 Black Horse Feed Bucket | Nominal 8L Reference

Black PP SC-PP08 is the separate portable-pail branch with a nominal 8L capacity.

View this product →

27L Triangular Horse Feed Tub | PP and Rim Details

The PP triangular tub provides a nominal 27L ground-container option whose footprint needs comparison.

View this product →

Start a product discussion

Send the Placement and Capacity Brief

Send the intended position, selected container and the capacity basis you need. Add a support profile and clearances for a mounted product or the available floor space for a tub. We can compare the complete container, its attachments and the quantities for your range.

Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, China
Email your product briefUse our contact form
Product discussion details
PlacementSupport drawing or floor area
ConnectionsHooks, handles and included parts
Size basisOutside envelope and volume method

Build Your Enquiry

  • Installed positionSend the support profile and clearances or the available floor footprint.
  • Model and contentsChoose the container and list handles, brackets or fittings required.
  • Capacity basisSpecify usable or brimful volume needs separately from dimension axes and units.