Practical sourcing guide

Saddle Cloths and Supplementary Pads for Range Development

Choose the main saddle cloth and any supplementary pad as separate products. Compare the outline, layers and attachment positions of each MAD or PD design, then choose appearance within that construction. A clear layer drawing helps you discuss fit and the supplied build before developing a coordinated range.

Compare cloth and pad constructionsReview cutting, layers and binding
Illustrative purple quilted saddle cloth on a black display form
  • Main clothChoose outline and strap layout
  • Extra padCompare the separate layer construction
  • Brand changeLocate artwork on the chosen component

Choose for your application

Different Cloth and Pad Lines Need Different Recipes

Relia can discuss MAD-0104, MAD-0102, PD010 and PD020 around your saddle outline, strap positions and requested presentation. Keep the cloth and supplementary pad on separate product lines. Agree each model's facing, lining, foam and filling as an actual stack so the sample has one clear construction to follow.

Choose the Construction Branch

MAD models
Lining, satin-facing and filling choices
PD010
Fleece and foam descriptions
PD020
Waffle-fabric and padding choices
Read the design and specification notes

Start with a main-cloth or supplementary-pad choice. For MAD-0104 and MAD-0102, compare the lining, satin-facing and filling requirements with your saddle outline. For PD010 and PD020, define the separate pad stack. Keep the attachment positions and proposed artwork with that selected construction.

The MAD Models Share Three Layer Labels
LayerMAD-0104MAD-0102
LiningWOOLWOOL
OutshellSATIN FABRICSATIN FABRIC
FillingCOTTONCOTTON
Additional material detail—Shell / Material: Cotton

A closer product look

Choose Each Layer for Its Place in the Pad

For PD010, compare the lining, fleece-facing direction and foam-and-filling stack as separate components. Include the 10mm foam requirement in the discussion, then confirm the fibre blend and filling mass with its unit for the selected version. This makes the layer choice useful for a sample and quotation.

Confirm the fibre allocation of the 80/20 blend and the filling-mass unit for PD010.

PD010 Material and Layer Plan

  1. LiningPolycotton
  2. Outshell80/20 Polycotton with synthetic fleece
  3. Filling10mm foam +300garm polyester
Read the design and specification notes

For PD010, agree the lining, synthetic-fleece-facing direction and 10mm foam-and-filling stack on one drawing. Confirm the fibre allocation of the 80/20 blend and the filling-mass unit in the quotation. Use the 1050g product-weight detail when discussing the complete unit, with packing weight treated separately.

Illustrative navy supplementary pad with contrasting fleece edge
Illustrative navy supplementary pad with contrasting fleece edge

Choose for your application

Map the Inner and Outer Pad Layers

For PD020, put the lining, facing, foam and filling on one layer drawing. Confirm their actual positions, fibres, thicknesses and mass units together, including the requested 10mm foam. You can then compare the completed pad's outline and attachments without borrowing another model's layer plan.

Confirm PD020's component fibres, layer positions and mass units on the same drawing.

PD020 Material and Layer Plan

Lining
100% F30 waffle fabric
Outshell
280g synthetic +10mm foam padding
Filling
300garm polycotton
Read the design and specification notes

For PD020, confirm the actual lining, facing and filling positions on one component drawing. Include the waffle fabric, synthetic material, 10mm foam and polycotton you want discussed, then agree the component fibres and mass units with the quotation and sample.

PD020 Layer Details to Confirm
ComponentDetails to confirm
Lining100% F30 waffle fabric
Outshell280g synthetic + 10mm foam padding
Filling300garm polycotton

Construction and making

Cutting and Binding Connect Layers to Fit

For a quilted build, cutting establishes the outline, quilting joins the chosen layer stack and binding finishes the perimeter. Straps add separate attachment points. Compare those features on one finished sample, with the agreed PD010 or PD020 component plan beside it.

Keep Each Proposed Layer Stack Separate

  1. MAD cloth routeChosen outline, facing, filling, lining and attachment positions.
  2. PD010Lining, facing and filling confirmed together on the PD010 component drawing.
  3. PD020Waffle fabric, foam and filling confirmed together on the PD020 component drawing.
Read the design and specification notes

Cutting sets the cloth outline; quilting joins the selected layers; binding finishes the perimeter. Compare edge flatness, strap attachment and the complete shape on one sample. Use the agreed layer stack for that model so a presentation change stays separate from a change in internal construction.

Cut outlineSaddle shape and panel edges
Position layersChosen stack and quilting path
Finish perimeterBinding and attachment straps

Share the product link and your intended use, with these details:

  • Outline and straps: Show the saddle-cloth or pad shape and attachment locations.
  • Layer map: Name the MAD or PD model and confirm its component materials, thicknesses and mass units.
  • Brand and quantity: Mark the artwork area and quantities for the chosen construction.
Email this selection brief

A closer product look

The Plaid View Locates the Presentation Choice

The MAD-0102 picture shows the outer presentation panel. Keep the selected Blue or CUSTMOIZED option with that design, then name the artwork area you want discussed instead of assuming every decoration method is available.

Use the CUSTMOIZED option to discuss the specific presentation and available treatment for your selected design.

Locate the Brand Change

  • BaseSelected MAD-0102 construction
  • AreaRequested panel and artwork location
  • AppearanceChosen pattern or colour request
Read the design and specification notes

Choose the MAD-0102 Blue version or use CUSTMOIZED to discuss a specific presentation request. Mark the outer panel and artwork area you want to change, then confirm the available treatment and sample appearance while keeping the underlying cloth construction clear.

Illustrative plaid saddle cloth arranged to show its outer presentation panel
Illustrative plaid saddle cloth arranged to show its outer presentation panel

Choose for your application

Construction Should Lead the Colour Decision

Begin with the MAD component discussion for a satin-facing direction, or compare the distinct PD010 and PD020 pad constructions. Choose appearance within that branch so a colour comparison does not also change the underlying layer plan.

Choose the Product Before Its Colour

MAD
Main cloth component decision
PD010
Fleece and foam branch
PD020
Separate waffle/padding branch
Read the design and specification notes

Choose the main satin-facing cloth or a separate fleece/foam or waffle-pad direction first. Then select the colours and presentation for that construction. This keeps the layer decision stable while you develop a coordinated retail range.

MAD branchMain cloth layer plan
PD010 branchFleece, foam and filling
PD020 branchWaffle, foam and filling plan

A closer product look

The Complete Pad Shows Edges and Strap Positions

The picture locates binding, quilted panels and straps around the outline. Keep those visible features on the selected drawing, with any supplementary pad separately named so its layers do not silently become part of the base cloth.

Keep the Supplied Layers Clear

  1. OutlineSelected finished shape
  2. AttachmentActual strap positions
  3. SupplyMain cloth and supplementary pad identities
Read the design and specification notes

The complete pad view shows how binding, quilted panels and straps relate to the outline. Locate those features on the chosen construction drawing, especially where trim or strap changes are requested. Keep any supplementary pad separate from the base cloth so the quoted unit describes the actual layers you will supply.

Illustrative dark quilted saddle cloth showing edge and strap details
Illustrative dark quilted saddle cloth showing edge and strap details

Products behind these choices

MAD-0104 Ruffle Equestrian Jump Dressage Saddle Pad Trim Fit Enquiry

Compare the MAD-0104 outline and trim with your main-cloth layer plan.

View this product →

MAD-0102 Classic Plaid Equestrian Jump Dressage Saddle Pad Strap Enquiry

Locate the MAD-0102 plaid presentation and strap or artwork changes.

View this product →

PD010 Synthetic Fleece Polycotton Horse Saddle Pad Fit Enquiry

Compare PD010's fleece and foam, then confirm the fibre allocation of the 80/20 blend.

View this product →

PD020 F30 Waffle Fabric Saddle Pad Layer and Riding Fit Enquiry

Compare PD020's waffle fabric and padding on one agreed layer drawing.

View this product →

Start a product discussion

Send the Outline and Intended Layer Plan

Send the chosen cloth or pad with the outline, strap positions and intended component stack. Add the brand area and quantities. We can discuss the materials, thicknesses and confirmed units for one sample that represents the fit and presentation you want to buy.

Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, China
Email your product briefUse our contact form
Product discussion details
ModelMAD or PD construction
Layer planMaterials by component
Finished sampleOutline, binding and straps

Build Your Enquiry

  • Outline and strapsShow the saddle-cloth or pad shape and attachment locations.
  • Layer mapName the MAD or PD model and confirm its component materials, thicknesses and mass units.
  • Brand and quantityMark the artwork area and quantities for the chosen construction.