Pet product brands · matched buckle assemblies
Metal Side-Release Buckles for a Matched Collar Range
Choose a metal collar buckle as a complete housing-and-insert pair, then compare it with the threaded webbing. Check the folded return and access to both release tabs before selecting appearance. Keeping the pair and collar layout together makes a first sample and later refill a clear product choice.
- Keep the pairHousing and insert stay model-specific.
- Show the collarInclude the webbing return and nearby parts.
- Reach the tabsCompare release access after threading.
Choose for your application
Keep the housing and insert under one identity
Relia can discuss YF10348AL at 20 mm, a separate aluminium buckle at 20 or 25 mm, and the 38 mm zinc YF10711DC. Keep each pair together beside the threaded collar layout rather than mixing nominally similar halves.
Carry the pair into the assembly
- ModelChoose one housing-and-insert combination.
- WebbingShow finished thickness and return route.
- Surrounding partsLocate the slider and decorative panel near release tabs.
Read the design and specification notes
At Relia, YF10348AL offers a 20 mm aluminium-alloy route alongside a separate aluminium side-release buckle available in 20 mm and 25 mm. YF10711DC provides the 38 mm zinc route. Keep each housing and mating half together under its own product identity. We can discuss the selected pair beside your threaded collar layout, where a nearby slider, fold or decorative panel may affect release access.
A closer product look
Keep release tabs accessible on the finished collar
Show the side tabs after threading, including the return fold and nearby adjuster or panel. This turns release access into a collar-layout question; any required closing or release performance still needs an agreed evaluation for that use.
State the closing, release and durability evaluation you need for the finished collar.
Expose the space around the release
- Buckle bodyShow the tabs on both sides.
- Webbing returnInclude layers around the slots.
- Neighbouring partsShow any adjuster or panel close to the tabs.
Read the design and specification notes
Show where the side tabs sit once the buckle is threaded onto the collar. Include the strap return and any nearby adjuster or decorative panel. This makes the request about the finished product layout, while any required closing or release performance can be specified for that particular use.
Choose for your application
Compare width routes without mixing the models
Choose among the 20 mm aluminium-alloy, 20/25 mm aluminium and 38 mm zinc references. Then define actual slot dimensions and folded-webbing clearance for that model; the width label is a starting point rather than a completed fit specification.
Confirm the selected pair's actual slot clearance with your folded webbing.
Keep each route distinct
- YF10348AL
- Aluminium alloy with a 20 mm option.
- Separate aluminium buckle
- Available size options are 20 and 25 mm.
- YF10711DC
- Zinc with a 38 mm option.
Read the design and specification notes
YF10348AL has an Aluminum Alloy material description and a 20 mm option. The separate aluminium side-release buckle offers 20 mm and 25 mm. YF10711DC has a Zinc material description and a 38 mm option. Select the relevant width route first, then describe the actual slot dimensions and folded webbing clearance that the collar needs.
| Reference | Declared base | Selected sizes |
|---|---|---|
| YF10348AL | Aluminum Alloy | 20 mm |
| 20/25 mm aluminium side-release buckle | Aluminum Alloy | 20 or 25 mm |
| YF10711DC | Zinc | 38 mm |
Choose for your application
Choose colour from the selected product options
YF10348AL has four appearance options; the separate 20/25 mm buckle offers Bright Nickel, while YF10711DC offers Black Nickel. Keep the colour tied to its exact product rather than carrying a palette across every material and width.
Compare the complete selected pair when agreeing the physical finish.
Read the palette by model
- YF10348AL
- Bright Nickel, Black Nickel, Beige or Light Green.
- 20/25 mm aluminium
- Bright Nickel is the stated option.
- YF10711DC
- Black Nickel is the stated option.
Read the design and specification notes
YF10348AL offers Bright Nickel, Black Nickel, Beige and Light Green. The separate 20/25 mm aluminium buckle offers Bright Nickel, while YF10711DC offers Black Nickel. Keep the chosen colour with its exact product; a colour name is not a statement of plating chemistry.
A closer product look
Give the housing room within the collar layout
A broad housing face and its slots may position the strap return differently from another outline. Include the assembled collar, actual webbing layers and neighbouring adjustment hardware so the comparison reflects the whole layout rather than headline width.
Compare the buckle inside the product
- Body outlineAllow for the space around the housing.
- Slot positionShow where the return fold sits.
- Adjustment hardwareKeep nearby parts visible in the same view.
Read the design and specification notes
Compare the available room around the body and slots, not simply the headline webbing width. A broad housing face may place the strap return differently from another outline. Supply an assembled collar view so the proposed buckle can be discussed beside the adjustment hardware and intended strap thickness.
Construction and making
Separate the decorative face from mating surfaces
For a die-cast housing, parting lines and openings create trimming and finishing decisions near slots and engagement surfaces. Compare the finished pair and threaded webbing. The actual route remains to be agreed for the selected model rather than inferred from its face.
Agree the selected buckle's making route and the finished mating surfaces.
Connect housing features to engagement
- Form the housingSlots and mating geometry define the connection.
- Trim and finishCompare edges around contact and engagement areas.
- Assemble the pairInclude release access and the threaded return.
Read the design and specification notes
If the chosen housing follows a die-cast route, mould parting lines and opening geometry create trimming and finishing decisions around the slots and mating surfaces. Those edges must be considered separately from the large decorative face. For these collar buckles, the actual route needs aligning with the selected model; the useful result is a completed pair whose engagement, release access and webbing passage can be compared in its final surface condition.
| Production stage | Finished feature | Buying consequence |
|---|---|---|
| Housing formation | Slots and mating geometry | Locate the actual engagement surfaces |
| Trimming and finish | Edges and completed surface | Separate contact condition from colour |
| Paired assembly | Housing, insert and threaded webbing | Evaluate the chosen complete collar layout |
Share the product link and your intended use, with these details:
- Selected complete-pair product, nominal width and colour
- Webbing width, thickness and threaded collar layout around release tabs
- Pair quantities and required closing or release evaluation
A closer product look
Compare appearance across the whole buckle
Compare the housing, tabs and other visible components together when developing a coordinated range. Keep the chosen model and size with that appearance; a shared colour name across different materials does not promise an identical finished result.
Look beyond the large front face
- HousingCompare the main visible surface.
- Tabs and insertInclude the other exposed components.
- Whole collarReview the pair beside its actual webbing colour.
Read the design and specification notes
A finish sample should represent the housing, tabs and other visible components together. Keep the selected colour name with the model and size. This lets a brand compare a coordinated collar range without assuming that the same appearance label produces identical results on every base material.
Choose for your application
Reorder a model and pair rather than a width
A 20 mm refill must distinguish YF10348AL from the separate 20/25 mm buckle. Keep complete-pair identity and colour together; a new housing or insert is a construction change even if the webbing label remains the same.
Keep the refill line unambiguous
- Exact productName the selected model or linked buckle.
- Complete pairRetain the intended housing and insert.
- Selected optionKeep width and colour with that pair.
Read the design and specification notes
For a 20 mm refill, distinguish YF10348AL from the separate 20/25 mm aluminium side-release buckle, with its colour and complete-pair requirement. This avoids substituting a different housing merely because the strap label matches. Keep changes in body shape or mating geometry separate from a colour-only reorder.
Products behind these choices
YF10348AL Aluminium Alloy Side Release Buckle, 20 mm, Four Colours
Compare the 20 mm aluminium-alloy complete pair and its four appearance options.
View this product →YF10711DC Black Nickel Side-Release Buckle for 38mm Collar and Webbing Assessment
Develop a separate 38 mm zinc housing-and-insert collar route.
View this product →Aluminum Alloy Side-Release Buckle, 20mm or 25mm
Compare the distinct 20/25 mm aluminium option without mixing its halves.
View this product →Start a product discussion
Send the complete collar-buckle brief
Send the buckle model and width, complete-pair quantity and threaded collar layout. Include webbing thickness, the return route and the operating behaviour you need evaluated. We can discuss the selected pair with the actual collar construction and appearance.
Qingdao Relia Saddlery Co., Ltd.Changjiang Road, Qingdao, Shandong, ChinaProduct discussion details
Prepare the collar version to discuss
- Select the pairName the product, width and appearance.
- Show the threadingInclude folds and nearby collar components.
- Define the needState quantities and required closing or release evaluation.